Подршка за ваш
Washing Machine
Филтрирај категорије
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
- Чланци за подршку: __ПХ_0__ за __ПХ_1__
Чланци за подршку: __ПХ_0__ за __ПХ_1__
- < 25 % when drum empty
- < 25 % when drum full
- -0- on the display
- 888 on the display
- ADD on the display
- Anti-crease/Check detergent
- Anti-crease/Finish indicator light flashes and Locked comes on
- App functions cannot be set on washing machine
- Buzzer at programme end after update
- Call Service
- CapDosing
- Check detergent
- Check inlet indicator light flashes
- Ctr on the display
- Dashes - - - on display and indicator lights flash
- Deleting, changing or cancelling delay start
- Different dispensing quantity for automatic detergent dispensing and TwinDos cartridge
- Display dark/no display
- Display has stripes/streaks
- Display has white dots/streaks
- Display texts in another language
- Door locked
- Drain indicator light flashes
- Drain/spin does not start
- Enter PIN code
- Exclamation mark and Technical fault flashing
- Fabric conditioner remains in fabric conditioner compartment
- Fault F1
- Fault F2
- Fault F3
- Fault F4
- Fault F10
- Fault F11
- Fault F15
- Fault F16
- Fault F19
- Fault F20 or Heating fault
- Fault F29
- Fault F34 or door lock
- Fault F35 or door release
- Fault F37
- Fault F39
- Fault F41
- Fault F43
- Fault F44
- Fault F45
- Fault F47
- Fault F49
- Fault F50
- Fault F51
- Fault F53
- Fault F56
- Fault F62
- Fault F63
- Fault F64
- Fault F65
- Fault F81
- Fault F83
- Fault F92
- Fault F103
- Fault F104
- Fault F105
- Fault F106
- Fault F130
- Fault F131
- Fault F138
- Fault F139
- Fault F140
- Fault F199
- Fault F210 or Check filter + nozzle
- Fault F211
- Fault F212
- Fault F213
- Fault F214
- Fault F220
- Fault F242
- Fault F252
- Fault F373
- Foam during washing
- Grey greasy particles left behind on laundry
- Grinding noises when drum rotates
- Hot water inlet fault
- i Cannot be changed
- i indicator light comes on with a 1
- i indicator light comes on with a 2
- Laundry has brown stains
- Laundry has grey stains
- Laundry has white residues
- Laundry is plastered against drum after spinning
- Laundry stiff after washing
- Laundry warm after washing
- Laundry/washing machine smells unpleasant
- Leaking access panel
- Leaking detergent drawer
- Leaking door
- Leaking screwed connection at water inlet hose
- Limescale deposits in drum
- Liquid detergent not getting laundry clean
- Liquid in capsule at the end of the programme
- Locked
- Locked indicator light comes on
- Locked. Enter code
- Maintenance wash does not remove odours
- noC on the display
- Pillows spins before wash cycle
- Powder detergent left behind in detergent drawer
- Programme running time is not correct
- Red cross (Hygiene info) indicator light illuminates
- Service water inlet fault
- Shirts does not start (WMR 860)
- Slurping noises during draining
- Soak/Pre-wash, Wash, Rinse or Rinse Stop flashes
- Spin speed changes in Rinse hold Extra
- Start does not light up
- Techn. fault, contact Service
- The Freshen up/Pre-Ironing function will not work
- Time left display changes/stops
- Time not shorter with small load
- Top loader drum opening not in upper position
- Top loader inner lid not closing properly
- TwinDos 1/2 is empty. Check the wash results
- TwinDos almost empty
- TwinDos cartridge is leaking
- TwinDos cartridge is not recognised
- TwinDos cartridges: changeover from film seal to caps
- TwinDos detergent cartridge difficult to insert
- TwinDos detergent not being used
- TwinDos empty
- TwinDos fill level indicator cannot be reset
- TwinDos maintenance for compartment 1/compartment 2 must be started
- TwinDos maintenance for compartment 1/compartment 2 must be started in the “Maintenance” menu
- TwinDos not usable
- TwinDos Whites or TwinDos Colours flashes
- Update does not start
- Use “TwinDos” or carry out TwinDos maintenance in the “Maintenance” menu
- Use TwinDos or start maintenance
- Vibrations during spinning
- Washing machine cannot be operated via the Miele app
- Washing machine displays different degree of soiling than washing assistant
- Washing machine does not respond during Add laundry (AddLoad)
- Washing machine drains frequently with PowerWash 2.0
- Washing machine inoperative
- Washing machine not spinning correctly
- Water drainage fault
- Water inlet fault
- Water under washing machine/washer-dryer
- Waterproof system activated
- Welcome tone cannot be changed
- Why is it not possible to set a temperature in the Eco 40–60 programme?
- Zero setting not possible
Претраживач упутстава за употребу
Овде ћете пронаћи упутства за употребу за своје Миеле уређаје
Пронађите своје упутство
Резервишите техничара
Радо ћемо примити вашу резервацију за поправку путем интернета или телефона
Планирајте посету
Контактирајте нас
Посетите нашу страницу Контактирајте нас да видите различите начине на које можете разговарати са нама.
Контактирајте нас