Fault F7 appears on the robot vacuum cleaner display.
Depending on the model, switch the robot vacuum cleaner off with the I/0 switch or the ON/OFF switch. The switch is located on the side of the robot vacuum cleaner.
Depending on the model, switch the robot vacuum cleaner on again with the I/0 switch or the ON/OFF switch.
Use the robot vacuum cleaner at an ambient temperature between 10 °C and 35 °C.
Check the battery display.
The battery display flashes red: depending on the model, switch the robot vacuum cleaner off and on again with the I/0 switch or the ON/OFF switch.
If F7 goes out after this but the battery display still flashes red, recharge the vacuum cleaner’s rechargeable battery in the docking station.
The battery display is not flashing red: press the sensor control in the control field of the robot vacuum cleaner for more than 3 seconds.
Recharge the vacuum cleaner’s rechargeable battery in the docking station.
RX2 and RX3 – after troubleshooting, the fault message can be reset in the following ways:
Switch the robot vacuum cleaner off and on again (I/0 switch).
Press the Power button on the remote control.
Press the sensor control in the control field of the robot vacuum cleaner for at least 3 seconds.
If the fault persists, contact the Miele Customer Service Department.
