The residual water drawer has not been detected.
Switch the steam ironing system off and on again.
Podrška za vaš
Fashion Master
Drain fault
Drain fault appears in the steam ironing system display.
After switching the steam ironing system off and back on, the residual water drawer has still not been detected.
Switch the steam ironing system off.
Clean and dry the metal contacts in the residual water drawer.
Switch the steam ironing system back on and follow the instructions shown in the display.
Remove the residual water drawer and fill it with fresh water.
Put the residual water drawer back in the tower.
Remove the residual water drawer again if you are prompted to do so by the appropriate message in the display.
Empty the residual water drawer and dry the metal contacts.
Put the residual water drawer back in the tower.
The steam ironing system is now ready for operation and will continue to operate from the point reached before the fault was registered.
There is a fault with the steam ironing system.
No remedy possible.
If the fault persists, please contact Miele Customer Service or book a repair appointment online.
Pretraživač uputstava za upotrebu
Ovde ćete pronaći uputstva za upotrebu za svoje Miele uređaje
Pronađite svoje uputstvo
Rezervišite tehničara
Rado ćemo primiti vašu rezervaciju za popravku putem interneta ili telefonom
Planirajte posetu
Kontaktirajte nas
Posetite našu stranicu Kontaktirajte nas da vidite različite načine na koje možete razgovarati s nama.
Kontaktirajte nas