Brew unit handle not locking

Make sure that the handle is positioned correctly.

Press the button on the bottom of the brew unit handle (1). Whilst doing so, turn the handle forwards (2).

Slide the brew unit into the coffee machine as far as it will go.

CVA 6xxx:

• 

• Make sure that the brew unit is pushed over the retainer (3) and clicks into place.

If necessary, push the brew unit in firmly until the brew unit is right up against the housing panel and the drive.

Press the button on the bottom of the brew unit handle (1). Whilst doing so, turn the handle backwards (2).

Remove any coffee residues from the guides towards the drip cover lid.

Use a damp cloth for this.

CM xxxx countertop coffee machines:

CVA xxxx built-in coffee machines:

Lubricate the connection/drive shaft of the brew unit with silicone grease.

You can order the silicone grease in the Miele online shop in the “Appliance cleaning and care products” section under “silicone grease” or from Miele Customer Service, “silicone grease material number 05132001”.

If the fault persists, please contact Miele Customer Service or book a repair appointment online.